How to Repair or Reinstall ur Windows XP

Watch the latest videos on YouTube.com

1. Boot the computer using the XP CD. You may need to change the
boot order in the system BIOS. Check your system documentation
for steps to access the BIOS and change the boot order.


2. When you see the "Welcome To Setup" screen, you will see the
options below This portion of the Setup program prepares Microsoft
Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.




3. Press Enter to start the Windows Setup.

do not choose "To repair a Windows XP installation using the
Recovery Console, press R", (you do not want to load Recovery
Console). I repeat, do not choose "To repair a Windows XP
installation using the Recovery Console, press R".

4. Accept the License Agreement and Windows will search for existing
Windows installations.

5. Select the XP installation you want to repair from the list and
press R to start the repair. If Repair is not one of the options,
read this Warning!!

6. Setup will copy the necessary files to the hard drive and reboot.
Do not press any key to boot from CD when the message appears.
Setup will continue as if it were doing a clean install, but your
applications and settings will remain intact.

Blaster worm warning: Do not immediately activate over the internet
when asked, enable the XP firewall
[ http://support.microsoft.com/?kbid=283673 ]
before connecting to the internet. You can activate after the
firewall is enabled. Control Panel - Network Connections. Right click
the connection you use, Properties, and there is a check box on the
Advanced [ http://michaelstevenstech.com/xpfirewall1.jpg ] page.


7. Reapply updates or service packs applied since initial Windows XP
installation. Please note that a Repair Install from the Original
install XP CD will remove SP1/SP2 and service packs will need to be
reapplied.
Service Pack 2
http://www.microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-
4F30-8245-9E368D3CDB5A&displaylang=en
An option I highly recommend is creating a Slipstreamed XP CD with SP2.
Slipstreaming Windows XP with Service Pack 2 (SP2)
http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp

______________________________________________________________________

Warning!!
If the option to Repair Install is not available and you continue
with the install;you will delete your Windows folder and Documents
and Settings folder. All applications that place keys in the registry
will need to be re-installed. You should exit setup if the repair
option is not available and consider other options.

Try the link below if the repair option is not available.
Windows XP Crashed?
http://www.digitalwebcast.com/2002/03_mar/tutorials/cw_boot_toot.htm
Here's Help.
A salvage mission into the depths of Windows XP, explained by a
non-geek

by Charlie White
http://www.digitalwebcast.com/2002/03_mar/tutorials/cw_boot_toot.htm

Related links
You May Lose Data or Program Settings After Reinstalling, Repairing,
or Upgrading Windows XP (Q312369)
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q312369

System Restore "Restore Points" Are Missing or Deleted (Q301224)
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q301224

How to Perform an In-Place Upgrade (Reinstallation) of Windows XP
(Q315341)
http://support.microsoft.com/search/preview.aspx?scid=kb;en-us;Q315341

Warning!! If the Repair Option is not Available
What should I do? Most important do not ignore the information below!

If the option to Repair Install is NOT available and you continue
with the install; you will delete your Windows folder, Documents and
Settings folders. All Applications that place keys in the registry
will need to be re-installed.

You should exit setup if the repair option is not available and
consider other options. I have found if the Repair option is not
available, XP is usually not repairable and will require a Clean
install.http://michaelstevenstech.com/cleanxpinstall.html
If you still have the ability to access the Windows XP installation,
backup all important files not restorable from other sources before
attempting any recovery console trouble shooting attempts.

Possible Fix by reconfiguring boot.ini using Recovery Console.
1.Boot with XP CD or 6 floppy boot disk set.
2. Press R to load the Recovery Console.
3. Type bootcfg.
4. This should fix any boot.ini errors causing setup not to see the
XP OS install.
5. Try the repair install.

One more suggestion from MVP Alex Nichol

"Reboot, this time taking the immediate R option, and if the CD
letter is say K: give these commands

COPY K:\i386\ntldr C:\
COPY K:\i386\ntdetect.com C:\


(two other files needed - just in case)

1. Type: ATTRIB -H -R -S C:\boot.ini DEL C:\boot.ini

2. Type: BootCfg /Rebuild

which will get rid of any damaged boot.ini, search the disk for
systems and make a new one. This might even result in a damaged
windows reappearing; but gives another chance of getting at the
repair"

Unlock toolbars to work with them

A toolbar is a collection of buttons or icons—usually displayed across the top of the screen—that represents the different tasks you can do within a program. For example, in Microsoft Internet Explorer, there is a toolbar for the standard Internet Explorer command buttons, one for entering an Internet address, and one for quick links you can set up.

When you open a toolbar, it will appear in a particular spot on the screen. If you want to change the location of the toolbar you can move it by dragging it to the new location. You can also resize the toolbar by dragging its edge. If you find a toolbar that cannot be moved or resized, the toolbar may be locked.

To unlock a toolbar

1.Make sure you have only one window open for the program. (You can look at the taskbar at the bottom of your screen to verify this.) Then, right-click the toolbar.

2.If Lock the Toolbars appears on the shortcut menu and is selected (a check mark appears to the left of it), click Lock the Toolbars to unlock the toolbar. If you see Lock the Toolbars, but no check mark appears to the left of it, the toolbar is already unlocked.

Note: If Lock the Toolbars does not appear on the shortcut menu, you may not be able to move or resize the toolbar.

If you are able move the toolbar, once you’ve moved the toolbar to the location where you want it, select Lock the Toolbars so that it isn’t inadvertently moved. To make sure the change is permanent, lock the toolbar, exit the program, and then reopen it. The toolbar should be locked.

AUTO DELETE TEMPORARY FOLDER.!!

what i prefer is %temp% " without quotes.. at Start -> Run..
this opens ur temp folder n den u cal erase it neatly// still try dis one too..


First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.

Prevent Pen Drive Virus

Prevent PenDrive Virus
:: Do the following ::

1) Disable autorun/autoplay function of your pen drive.

2) Now plugin your pen drive and open any folder of your computer.
(Do not open any folder from ur pen drive.)

3) Now goto tools then select Folder Option
In that box mark the Show Hidden Files & Folders option.
Also Uncheck Hide Extension for known file types & Hide Protected OS files.

Now click apply and ok buttons and close that folder.

4) Nome come to desktop.
On the Desktop, click on windows Start button and select Search for files & folders.

When the search dialog box appears on the screen, in that click on All Files & Folders, now click on More Advanced Options then select search Hidden files & folders.


Now go above & in Look In option, select your pendrive letter (For example E: Or G:)
and hit Enter.

5) Now if you see any unknown .Exefiles, simply delete them all.